Juki

Juki LU-1508H

$ 3,359.00

The maximum stitch length is 10mm. The complete rectangular feed locus enables accurate feed of extra heavy materials while preventing stitch gathering. With its sufficient needlebar stroke of 38mm and long 190R
needle, the machine supports the sewing of extra heavy materials. The machine comes with an extra large steel handwheel with a diameter as large as φ175.

Note: Assembled Table , Stand and Motor. The very best heavy duty compound feed, walking foot and needle feed machine for applications including auto upholstery.

Single Needle
Needle Feed And Walking Foot
2500 Stitches Per Minute
New Rectangular Feed Prevents Gathering
Includes Table, Stand, And Motor
Handles Heavyweight Materials
Industrial Sewing Machine

The Juki LU 1508 replaces the very successful Juki 562/563 model, which was sold for over 20 years and is still is use with many manufactures.

This new model has many new features which Juki has researched & tested thought-out the heavy-weight fabric industry.

It is a general purpose needle feed, walking foot machine for use on medium-heavy weight materials and is suited to sewing, for example, car seats, carpets, general upholstery and leather articles etc.

FEATURES:
New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
Well tensed seams are consistently produced without pitch errors
With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
Stitch length can be easily selected by the stitch dial
Many improved features offer enhanced operational ability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large hand-wheel
Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
Alternating vertical movement mechanism prevents irregular stitches
High 16 mm presser foot lift enables easy material handling
Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
Pressing the reset button will immediately return the machine back to the normal state

US Warranty 90- Days labor on defects in materials and workmanship.
Non-US Warranty: 30- days parts and labor

Specifications

New mechanism with a rectangular feeding motion promises consistent feed of materials of all thickness without the risk of stitch gathering
Reduced lift of feed dog helps prevent the material from flopping and reduces operating noise and vibration
Compared with elliptical feed, rectangular feed helps reduce gathered stitches
With adoption of a new rectangular feed mechanism, an alternating vertical movement mechanism and a unison feed mechanism helps feed heavyweight materials powerfully and smoothly
Well tensed seams are consistently produced without pitch errors
With its maximum stitch length of 9 mm, the machine can be applied to a broader range of uses
Stitch length can be easily selected by the stitch dial
Many improved features offer enhanced operational ability such as an easy-to-observe area around the needle, placement of bobbin winder on the front face, and a large hand wheel
Knee-lifter mechanism built-in to bed reduces pressure required to operate the knee-lifter
Full-open-type top design makes it possible to fully open the top of the machine arm and helps make adjustment easy without tilting the machine head
Alternating vertical movement mechanism prevents irregular stitches
High 16 mm presser foot lift enables easy material handling
Since machine incorporates a vertical-axis double-capacity hook, the frequency of bobbin thread replacement is reduced, further increasing efficiency
If thread gets caught in the hook, the safety device is automatically engaged, preventing possible hook damage
Pressing the reset button will immediately return the machine back to the normal state.
Maximum stitch length: 9 mm
Needle bar stroke: 36 mm
Alternating vertical movement: 2.5 mm - 6.5 mm
Thread take-up: slide type
Hook: Vertical-axis, double-capacity hook
Thread: #30
#5, B46
B138
Weight: 93.7 lbs
extra large steel handwheel with a diameter of 175mm
Juki LU1508H Needle System SY3355 Juki Part No. MC-3720016-00 or generic 190R-Long
Juki LU1508 Bobbin, Juki Part Number B9117-563-000, no generic available that we can find.